TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
PRE-INSTALLATION PROCEDURES
INITIAL SETUP:
References
Tools and Special Tools
Tool kit, general mechanic's (item 59, WP 0490 00)
WP 0021 00
WP 0096 00
Materials/Parts
WP 0097 00
Compound, cleaning (item 9, WP 0489 00)
WP 0144 00
Gasket (item 868, WP 0491 00)
TM 9-2350-256-10
Lockwashers (12) (item 638, WP 0491 00)
Lockwashers (15) (item 640, WP 0491 00)
Equipment Condition
Lockwashers (20) (item 642, WP 0491 00)
Boom raised to hoisting position (refer to TM 9-2350-
Pin, cotter (item 870, WP 0491 00)
256-10)
Seal (item 869, WP 0491 00)
Engine deck assembly removed (see WP 0336 00)
Seal (item 871, WP 0491 00)
Strips, rubber (2) (item 867, WP 0491 00)
NOTE
Although parts listed in the initial set-up are kit furnished, part numbers are provided in the appendices
for replenishment purposes.
Assembly and Preparation for Use
NOTE
The following miscellaneous items are included in the deep water fording kit. This table is provided for
replenishment purposes.
Table 1. Miscellaneous Items
Item
Document/Part
National Stock Number
Description
Number
Number
1
MMM-A-1617
--
Adhesive, rubber, type III--
1-pint (0.47-liter) can
2
H-B-643
Brush, acid-swabbing, type II, class I, size 2
3
11672186
Caulking compound--1-1/2-inch- (in.-)
(38-millimeter- [mm] ) wide x 25-foot- (ft-)
(7.62-meter- [m-] ) long roll
4
Sealant, adhesive, RTV, general purpose,
white--1-ounce (28.4-gram) primer and
10.3-ounce (292-gram) adhesive
5
Sealing compound, RTV general noncorro-
sive--1-gallon (3.79-liter) pail
0465 00-1
