SECTlON VI: EXTERIOR STOWAGE
TM 9-2350-256-20
WARNING
Tow bar assembly is extremely heavy-two persons are required for removal and
installation.
a. REMOVAL
NOTE
Lift or remove exhaust deflector (see paragraph 9-59) as required for clearance.
Steps 1 through 5 apply to both left- and right-side tow bar mounting brackets.
1
Loosen nut (1) to open clamp assembly (2) and remove tow bar (3) from bracket (4).
2
Remove cotter pin (5), pin (6), two flat washers (7),
and clamp assembly (2) from bracket (4).
3
Remove eyebolt (8) from clamp assembly (2) by
removing cotter pin (9), pin (10), and four flat washers
(11).
4
Remove cotter pin (12), nut (1), lockwasher (13), and
spacer (14) from eyebolt (8).
WARNING
If bracket (4) or tow chain (15) is
dropped, it may cause serious injury.
5
Remove bracket (4) by removing four screws (16),
four lockwashers (17), and four flat washers (18).
9-213
