SECTlON VI: EXTERIOR STOWAGE
TM 9-2350-256-20
c. ASSEMBLY
1
Connect tube assemblies (26) with headed pin (30) and locking pin (29).
2
Install clevis (25) on each tube assembly (26) with headed pin (28) and locking pin (27).
3
Install headed pin (24) and locking pin (23) on each of two devises (25).
d. INSTALLATION
1
Install clamp (20), two clamps (21), three new
lockwashers (22), and three screws (19). Do not
tighten screws.
2
Install tow chain (15) and secure using two clamps
(21) and clamp (20). Tighten three screws (19).
NOTE
Steps 3 through 7 apply to both left- and
right-side tow bar mounting brackets.
3
Install bracket (4) with four screws (16), four new
lockwashers (17), and four flat washers (18).
4
Install spacer (14), new lockwasher (13), nut (1), and
new cotter pin (12) to eyebolt (8).
5
Install eyebolt (8) to clamp assembly (2) with four flat
washers (11), pin (10), and new cotter pin (9).
6
Install clamp assembly (2) to bracket (4) with two flat
washers (7), pin (6), and new cotter pin (5).
7
Place tow bar (3) in bracket (4), close clamp assembly
(2), and tighten nut (1).
9-89 REPLACE/REPAIR BRACKET ASSEMBLIES FOR SIDE TOW BAR AND SIDE TOW CABLES
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C, item 53)
Lockwashers (10) (Appendix G, item 134)
Pins, cotter (2) (Appendix G, item 213)
Pins, cotter (2) (Appendix G, item 221)
9-215