TM 9-2350-256-20
CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
9-95 REPLACE ROADWHEEL, SUPPORT WHEEL, AND SPROCKET ATTACHING
HARDWARE
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanics (Appendix C, item 53)
Lockwashers (6) (Appendix G, item 134)
NOTE
Removal and installation procedures are the same for both left- and right-side wheels and sprockets.
Left side shown.
a. REMOVAL
1
Remove sprocket (1) by removing three screws (2), three lockwashers (3), and three flat washers (4).
2
Remove roadwheel (5) by removing three nuts (6) and three flat washers (7).
3
Remove support wheel (8) by removing three bolts (9).
b. INSTALLATION
1
Install support wheel (8) using three bolts (9).
2
Install roadwheel (5) using three flat washers (7) and three nuts (6).
3
Install sprocket (1) using three flat washers (4), three new lockwashers (3), and three screws (2).
9 - 2 2 2
Change 1