SECTION VII: INTERIOR STOWAGE
TM 9-2350-256-20
9-97 REPLACE PASSIVE NIGHT VIEWER STOWAGE BOX, HAND GRENADE
BOXES, AND MACHINE GUN AND RIFLE HOLDERS
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts-Continued:
Tool kit, general mechanic's (Appendix C, item 53)
• Lockwashers (12) (Appendix G, item 132)
Parts:
Equipment Conditions:
• Lockwashers (8) (Appendix G, item 118)
• Contents of boxes removed
• Lockwasher (Appendix G, item 131)
• Machine guns and rifles removed from clips
a. REMOVAL
1
Remove two hand grenade boxes (1) by removing
four screws (2) and four lockwashers (3) from each.
2
Remove rifle stowage clip (4) from rifle holder (5)
by removing nut (6), lockwasher (7), and screw (8).
3
Remove rifle holder (5) from mounting bracket (9)
by removing two nuts (10), four lockwashers (11),
and two screws (12).
4
Remove machine gun holder (13) from mounting
bracket (9) by removing two nuts (14), four
lockwashers (15), and two screws (16). Then
remove passive night viewer stowage box (17)
from mounting bracket.
5
Remove mounting bracket (9) from wire rope
shield (18) by removing four screws (19) and four
lockwashers (20).
9-227
