TM 9-2350-256-20
CHAPTER 9:
MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
9 - 9 9
REPLACE ROCKET AMMUNITION STOWAGE BOX ASSEMBLY
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Material/Parts-Continued:
Tool kit, general mechanic’s (Appendix C, item 53)
•Pads (4) (Appendix G, item 200)
*Pads (2) (Appendix G, item 201)
Material/Parts:
• Adhesive (Appendix D, item 3)
•Lockwashers (11) (Appendix G, item 132)
•Lockwashers (6) (Appendix G, item 151)
Personnel Required:
Three
a. REMOVAL
1
Remove shelf assembly (1) by removing six screws (2) and six lockwashers (3).
2
Remove two straps (4) by unbuckling and sliding out of slots.
3
Remove tray (5) from box assembly (6) by removing two screws (7), two lockwashers (8), two screws (9), and
two lockwashers (10).
4
Remove support (11) by removing screw (12) and lockwasher (13).
5
Remove three screws (14), three lockwashers (15), and three washers (15.1) securing top of box assembly (6)
Box assembly is extremely heavy-three persons are required to remove it from vehicle.
6
Remove box assembly (6) by removing two screws (16), two lockwashers (17), and two washers (17.1).
NOTE
Box assembly (6) must be inverted to remove pads (18)
7
Remove four pads (19) and two pads (18) from box assembly (6).
8
Remove two drawers (20), if necessary.
9 - 2 3 2
Change 1
