CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-101 REPLACE ACETYLENE AND COMPARTMENT DOOR HARDWARE AND
RELATED PARTS
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Material/Parts-Continued:
Tool kit, general mechanic's (Appendix C, item 53)
• Pins, cotter (2) (Appendix G, item 213)
Material/Parts:
Reference:
• Cement, adhesive (Appendix D, item 3)
TM 9-2350-256-10
•Lockwashers (20) (Appendix G, item 132)
a. REMOVAL
1
Remove hose retaining strap (1) and gage straps (2 and 3) by threading end of straps through slots in
compartment.
2
Remove thumbscrew (4).
3
Remove hose rack (5) by removing three screws (6) and three lockwashers (7).
4
Remove two hose retainers (8) by removing four screws (9), four lockwashers (10), and four flat washers (11).
5
Remove bolt cutter retaining clamp (12) by removing screw (13) and lockwasher (14).
6
Remove two door handles (15) by removing two cotter pins (16), two nuts (17), two flat washers (18), and two
latches (19).
9-236
