CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-104 REPLACE ODDMENT TRAY, LEFT SIDE
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C, item 53)
• Lockwashers (3) (Appendix GC, item 130)
• Lockwashers (4) (Appendix G, item 132)
a. REMOVAL
1
Remove plate (1) by removing three screws (2), three lockwashers (3), and three nuts (4).
2
Remove two nuts (5), two lockwashers (6), and two screws (7).
3
Slide oddment tray (8) out of bracket assembly (9).
4
Remove bracket assembly (9) by removing two screws (10) and two lockwashers (11).
5
Remove two straps (12) from oddment tray (8).
b. INSTALLATION
1
Install bracket assembly (9) using two screws (10) and two new lockwashers (11).
2
Slide oddment tray (8) into bracket assembly (9).
3
Install two new lockwashers (6), two nuts (5), and two screws (7).
4
Install plate (1) with three new lockwashers (3), three nuts (4), and three screws (2).
5
Install two straps (12) to oddment tray (8).
9-240
