CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-102 REPLACE FLASHER LIGHT CASE
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts:
Equipment Condition:
Tool kit, general mechanic's
Lockwashers (8) (Appendix G,
Flasher light case contents
(Appendix C, item 53)
item 130)
removed
a. REMOVAL
NOTE
Six screws (1) on seat back (2) may be loosened or removed as necessary for removal and installation
of flasher light case (3) and brackets (4).
1
Remove flasher light case (3) from four brackets (4) by removing four screws (5), four lockwashers (6), and
four nuts (7).
2
Remove four brackets (4) from commander's seat by removing four screws (8), four lockwashers (9), and four
nuts (10).
b. INSTALLATION
1
Install four brackets (4) on commander's seat with four screws (8), four new lockwashers (9), and four nuts
(10).
2
Install flasher light case (3) on four brackets (4) with four screws (5), four new lockwashers (6), and four nuts
(7).
NOTE
Follow-on maintenance: Install flasher light case contents
9-238
