CHAPTER 12: MAINTENANCE OF MAIN HYDRAUUC SYSTEM
TM 9-2350-256-20
12-14 REPLACE SPADE CABLE LUBRICATION LINE (MANUAL SPADE
RELEASE)-Continued
b. INSTALLATION
1 Install connector (4) by installing two new lockwashers (15) and two screws (14).
2 Install connector (3) by installing two new lockwashers (13) and two screws (12).
3 Install couplings (11) into connectors (3 and 4).
4 Install two adapters (8) onto tubes (9 and 10).
5 Install two adapters (5) onto tubes (6 and 7).
6 Install four adapters (2) and six fittings (1) to connectors (3 and 4).
12-15 REPLACE SPADE RELEASE LUBRICATION FITTING
THIS TASK COVERS
a. Removal
b. Installation
12-42
