TM 9-2350-256-20
a. REMOVAL
1 Remove filler cap (1).
2 Remove six screws (2) and six lockwashers (3).
3 Remove filler neck (4), gasket (5), and filter (6).
4 Discard gasket (5) and filter (6).
b. INSTALLATION
1 Install new filter (6), new gasket (5), and filler neck
(4).
2 Install six new lockwashers (3) and six screws (2).
3 Install filler cap (1).
NOTE
Follow-on maintenance: Install rear
intermediate right
access floor plate
(see paragraph
9-10)
12-10 REPLACE/REPAIR OIL TEMPERATURE TRANSMITTER AND SWITCH
HOUSING ASSEMBLY
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Parts--Continued:
Tool kit, general mechanic's (Appendix C, item 53)
Lockwashers (4) (Appendix C, item 126)
Lockwashers (6) (Appendix G, item 130)
Parts:
Gasket (Appendix G, item 85)
Equipment Condition:
Gasket (Appendix G, item 33)
Rear intermediate right access floor plate removed
(see paragraph 9-10)
12-37
