TM 9-2350-256-20
NOTE
Clean filter element (11) in dry-cleaning solvent. Dry with compressed air.
1
Install two new preformed packings (10), filter element (11), and filter retainer (9) to cover (14) with three
screws (12).
2
Install spring (15) into filter element assembly (1).
3
Install cover (8) with two new gaskets (13) and filter element (11) to filter element assembly (1) with eight
screws (7).
d. INSTALLATION
1
Install two flanges (6) to filter element assembly (1) with four new lockwashers (5) and four screws (4).
2
Install new preformed packings (3) and four screws (2).
NOTE
Follow-on maintenance:
Install rear center floor plate (see paragraph 9-12)
12-6 REPLACE EXTERNAL HYDRAULIC RESERVOIR COMPONENTS
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts-Continued:
Tool kit, general mechanic’s (Appendix C, item 53)
*Lockwashers (8) (Appendix G, item 152)
Parts:
*Packing, preformed (Appendix G, item 196)
*Lockwashers (4) (Appendix G, item 133)
*Lockwashers (4) (Appendix G, item 134)
Equipment Condition:
Cab subfloor plates removed as necessary (see
Chapter 9, Section I)
a. REMOVAL
1
Remove four screws (1), four lockwashers (2), and two flanges (3).
2
Remove from flange (4), elbow (5), nipple (6), elbow (7), and nipple (8).
3
Remove four screws (9), four lockwashers (10), flange (11), and preformed packing (12).
Change 1
12-33
