CHAPTER 12: MAINTENANCE OF MAIN HYDRAULIC SYSTEMTM 9-2350-256-2012-4 REPLACE FUEL TRANSFER PUMP AND FLOW REGULATOR-Continuedb. INSTALLATION1Install ID plates (50, 51, 52, and 53) with four new drivescrews (54, 55, 56, and 57) each.2Install elbows (47 and 48) to fuel transfer pump (49).3Connect hoses (45 and 46) to elbows (47 and 48).4Install two caps (43 and 44) and two couplings (41 and 42).5Install two new locknuts (39 and 40) and two elbows (36 and 38) to two couplings (41 and 42).6Connect hose (37) to elbow (38), and hose (35) to elbow (36).7Install tee (33) to regulating valve (34), and elbows (30 and 32) to tee.8Connect hose (31) to elbow (32), and hose (29) to elbow (30).9Install elbow (27) and new locknut (28) to control valve (9).10Connect hose (26) to elbow (27), and install elbow to control valve (9).11Install pipe (24) to elbow (25) and tee (16).12Install new locknut (23) and tee (20) to tee (16).13Install elbow (22) to tee (20) and hose (21).14Install new locknut (19) and elbow (18) to tee (20), and hose (17) to elbow.15Install new locknut (15) and elbow (14) to tee (16), and connect hose (13) to elbow.16Install new locknut (12) and elbow (11) to control valve (9).17Connect hose (10) to elbow (11), and install new locknut (8) and tee (4) to control valve (9).18Install new locknut (7) and elbow (6) to tee (4).19Connect hose (5) to elbow (6), and install nipple (3) to tee (4).20Install elbow (2) to nipple (3), and connect hose (1) to elbow.12-30
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
