TM 9-2350-256-20
CHAPTER 12: MAINTENANCE OF MAIN HYDRAULIC SYSTEM
12-6 REPLACE EXTERNAL HYDRAULIC RESERVOIR COMPONENTS-Continued
4
Remove four screws (13), four lockwashers (14), and two flanges (15).
5
Remove four screws (16), four lockwashers (17), and two flanges (18).
6
Remove tee (19) and nut (20).
7
Remove coupling (21) and nut (22).
b. INSTALLATION
1
Install nut (73) with coupling (21).
2
Install nut (20) with tee (19).
3
Install two flanges (18) with four new lockwashers (17) and four screws (16).
4
Install two flanges (15) with four new lockwashers (14) and four screws (13).
5
Install new preformed packing (12), flange (11), four new lockwashers (10),.and four screws (9).
6
Install nipple (8), elbow (7) with nipple (6), and elbow (5) to flange (4).
7
Install two flanges (3) with four new lockwashers (2) and four screws (1).
NOTE
Follow-on maintenance:
Install cab subfloor plates if removed (see Chapter 9, Section I)
12-34
