SECTION: FUEL SYSTEM
TM 9-2350-256-20
4
Remove right rear upper cover (10) by removing 10
screws (11).
5
Remove left front upper cover (12) by removing 10
screws (13).
6
Remove left rear upper cover (14) by removing 12
screws (15).
b. INSTALLATION
1
Install left rear upper cover (14) with 12 screws (15).
2
Install left front upper cover (12) with 10 screws (13).
3
Install right rear upper cover (10) with 10 screws (11).
4
Assemble oil level indicator tube cap assembly (5) to
right front upper cover (2) with new gasket (8), two new
preformed packings (9), two screws (6), and two new
lockwashers (7).
5
Install right front upper cover (2) and strap (3) with 12
screws (4).
6
Install oil level gage rod (1).
NOTE
Follow-on maintenance:
Install engine deck
(see paragraph 9-51)
4—
7
