CHAPTER 4: MAINTENANCE OF MAIN ENGINE FUEL, AIR INTAKE,
TM 9-2350-256-20
AND EXHAUST SYSTEMS
4— 4 REPLACE/REPAIR FUEL TRANSFER PUMP HOSES AND RELATED PARTS-Continued
2
Install hose (16) with elbow (18) to pump assembly (12) using adhesive tape.
3
Install elbow (17) to hose (16).
4
Install elbow (10) and nipple (11) to hose (4).
5
Install clamp (15) with new lockwasher (14) and screw (13) to hose (16).
6
Install hose (4) with elbow (10) and nipple (11) to pump assembly (12) using adhesive tape.
7
Install nut (9) and nipple (8) to hose (4) using adhesive tape.
8
Install strap (7) with two new lockwashers (6) and two screws (5).
9
Install clamp (3), new lockwasher (2), and screw (1) to hose (4).
NOTE
Follow-on maintenance:
Close right rear air inlet door (see paragraph 9-56)
4— 5 REPLACE FUEL PUMP (GEAR TYPE), LINES, AND RELATED EQUIPMENT
THIS TASK COVERS
a. Removal
b. Installation
c. Test
INITIAL SET-UP
Tools:
Parts:
• Tool kit, general mechanic's (Appendix C,
Gasket (Appendix G, item 36)
item 53)
• STE/ICE-R (Appendix C, item 51)
Equipment Condition:
Powerplant removed (see paragraph 3-1) for
access to fuel pump
4—
12
