CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6B48 REPLACE/REPAIR FLASHER SYSTEM PANEL WIRING HARNESS
(11672373)-Continued
b. DISASSEMBLY
Disassemble wiring harness (see Chapter 6, Section VII).
c.
ASSEMBLY
Assemble wiring harness (see Chapter 6, Section VII).
d.
INSTALLATION
1
Connect connector (7) to PTO engage light (16).
2
Connect connector (6) to fire extinguisher engine
shutoff light (15).
3
Connect Y-connector (5) to fire extinguisher engine
shutoff switch (13) and connector (14).
4
Connect connector (4) to hydraulic reservoir disconnect
(12).
5
Connect Y-connector (3) to governor control switch
(10) and connector (11).
6
Connect connector (2) to hydraulic oil temperature light
(9).
7
Connect connector (1) to hydraulic oil temperature
gage (8).
NOTE
Follow-on maintenance:
Install rear intermediate
right access floor plate
(see paragraph 9-11)
Install subfloor plates if
removed (see Chapter 9,
Section I)
6—
108
