REPLACE/REPAIR FUEL GAGE PANEL LEAD ASSEMBLY (10866881)

REPLACE/REPAIR FUEL PUMP SWITCH PANEL LEAD ASSEMBLY (11671227-3)

REPLACE/REPAIR SWITCH PANEL TO HEAD LAMPS AND BULKHEAD WIRING HARNESS (11671568)

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
652

SECTION V VEHICLE WIRING TM 9-2350-256-20 6-51 REPLACE/REPAIR FUEL GAGE PANEL LEAD ASSEMBLY (10866881] THIS TASK COVERS a. Removal b. Disassembly c. Assembly d. Installation INITIAL SET-UP Equipment Conditions: Gage panel assembly removed (see paragraph 6-8) WARNING Be certain MASTER switch is OFF when working on electrical systems to avoid electrical shock and burns. Connector No. Electrical Lead To: Wire No. 1 Fuel selector switch 28 2 Fuel gage 28 a. REMOVAL 1 Disconnect connector switch (1) from fuel selector switch (3). 2 Disconnect connector switch (2) from fuel gage (4). b. DISASSEMBLY Disassemble lead assembly (see Chapter 6, Section VII). c. ASSEMBLY Assemble lead assembly (see Chapter 6, Section VII). d. INSTALLATION 1 Connect connector (2) to fuel gage (4). 2 Connect connector (1) to fuel selector switch (3). NOTE Follow-on maintenance: Install gage panel assembly (see paragraph 6-8) 6— 111

Privacy Statement
Press Release
Contact