CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6— 53 REPLACE/REPAIR SWITCH PANEL, RADIO, AND BILGE PUMP TO
BULKHEAD WIRING HARNESS (11671798)-Continued
a. REMOVAL
1
Remove 30 clamps (13) by removing screw (14) and lockwasher (15) from each.
2
Remove connector (1) from bulkhead disconnect (16) by removing four screws (17), four lockwashers (18), and
gasket (19).
3
Disconnect connectors (2, 3, and 4) from accessories panel wiring harness (20).
4
Disconnect connector (5) from bilge pump circuit breaker to switch panel lead assembly (21).
6—
116
