CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-52 REPLACE/REPAIR SWITCH PANEL TO HEADLAMPS AND BULKHEAD
WIRING HARNESS (116715681--Continued
c. ASSEMBLY
Assemble wiring harness (see Chapter 6, Section VII).
d. INSTALLATION
1
Install connector (5) and new gasket (16) to bulkhead
disconnect (13) using four screws (14) and four new
lockwashers (15).
2
Connect connector (4) to heater control box (12).
3
Connect connector (3) to fire extinguisher interlock
switch (11).
4
Connect connector (2) to headlight and dimmer switch
wiring harness (10).
5
Connect connector (1) to main switch panel (9).
6
Install 24 clamps (6) using new lockwasher (8) and
screw (7) for each.
NOTE
Follow-on maintenance:
Install air cleaner assembly (see paragraph 4-24)
6—
114
