TM 9-2350-256-20
CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
6-55 REPLACE/REPAIR SWITCH PANEL TO GAGE PANEL AND
MISCELLANEOUS SWITCHES WIRING HARNESS (PASSIVE NIGHT VIEWER)
(DUAL VOLTAGE) (12322547)--Continued
a. REMOVAL
1
Remove 11 clamps (21) by removing screw (22) and lockwasher (23) from each.'
2
Disconnect connector (1) from rigger's service light switch (24).
3
Disconnect two connectors (2 and 3) from dome light (25).
4
Disconnect ground (4) from hull (26) by removing screw (27).
5
Disconnect connector (5) from passive night viewer (28).
6
Disconnect two connectors (6 and 7) from gage panel to bulkhead wiring harness (29).
6-126
