CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6— 54 REPLACE/REPAIR SWITCH PANEL TO NEUTRAL SAFETY TO BULKHEAD
WIRING HARNESS (11671420)--Continued
3
Disconnect two connectors (2 and 3) from electrical accessories panel wiring harness (19).
4
Disconnect two connectors (4 and 5) from neutral safety switch (20).
5
Disconnect two connectors (6 and 8) from manifold preheat switch (21).
6
Disconnect connector (7) from circuit breaker (22).
7
Disconnect connector (9) from electrical fuel pump (23).
8
Remove ground lead (10) by removing screw (24) and lockwasher (25).
9
Remove connector (11) from bulkhead disconnect (26) by removing four screws (27), four lockwashers (28),
and gasket (29).
6—
122
