SECTION V: VEHICLE WIRING
TM 9-2350-256-20
10 Disconnect connector (12 and 13) from APU control box to foot dimmer switch and bulkhead wiring harness
(30).
11 Disconnect connector (14) from fire extinguisher
engine shutoff switch (31).
b. DISASSEMBLY
Disassemble wiring harness (see Chapter 6, Section
VII).
c. ASSEMBLY
Assemble wiring harness (see Chapter 6, Section VII).
d. INSTALLATION
1
Connect connector (14) to fire extinguisher engine
shutoff switch (31).
2
Connect two connectors (12 and 13) to APU control box to foot dimmer switch and bulkhead wiring harness
(30).
3
Install connector (11) to bulkhead disconnect (26) using four new lockwashers (28) and four screws (27).
4
Install ground lead (10) using screw (24) and new lockwasher (25).
5
Connect connector (9) to electrical fuel pump (23).
6
Connect connector (7) to circuit breaker (22).
7
Connect two connectors (6 and 8) to manifold preheat switch (21).
8
Connect two connectors (4 and 5) to neutral safety switch (20).
9
Connect two connectors (2 and 3) to electrical accessories panel wiring harness (19).
6—
123
