CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-59 REPLACE/REPAIR ENGINE WIRING HARNESS (SINGLE VOLTAGE) (11671816)--Continued
13 Disconnect four connectors (14 through 17) from
generator (49) by removing two nuts (50) and two flat
washers (51).
14 Disconnect connector (18) from generator blower (52).
15 Remove ground lead (19) from engine (36) by
removing screw (53) and two lockwashers (54).
16 Disconnect connector (20) from left side manifold
preheat coil (55).
17 Remove ground lead (21) from engine (36) by
removing bolt (56) and two washers (57).
18 Disconnect connector (22) from engine high oil temperature switch (58).
19 Disconnect connector (23) from engine oil temperature sending unit (59).
20 Disconnect connector (24) from time totalizing meter (60).
21 Remove ground lead (25) by removing nut (61).
22 Disconnect connector (26) from engine oil pressure sending unit (62).
23 Disconnect connector (27) from engine low oil pressure switch (63).
6-152
