TM 9-2350-256-20
CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
6-74 REPLACE/REPAIR BULKHEAD TO ENGINE BRACKET AND REAR FUEL
TANK TRANSMITTER WIRING HARNESS (SINGLE VOLTAGE) (11671789)-
Continued
a. REMOVAL
1
Remove 16 clamps (17) by removing screw (18) and
lockwasher (19) from each.
2
Disconnect connector (1) from bulkhead disconnect
(20).
3
Disconnect connector (2) from rear fuel tank
transmitter (21).
4 Disconnect connector (3) from APU and main
engine armature relays to voltage regulator wiring
harness (22).
5
Disconnect connector (4) from switching relay box
(23).
6
Disconnect three connectors (5, 6, and 7) from batteries to master relay, voltage regulator, slave receptacle,
and engine disconnect wiring harness (24).
7
Disconnect connector (8) from main engine disconnect (25).
8
Disconnect six connectors (10 through 15) from bulkhead to main engine wiring harness starter relay
wiring harness (26).
9
Disconnect connector (16) from circuit breaker (27).
6 - 1 9 2
Change 1
