TM 9-2350-256-20
CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
6-76 REPLACE/REPAIR BULKHEAD TO APU, MASTER RELAY, AND RIGGER'S
LIGHTS WIRING HARNESS (SINGLE VOLTAGE) (11671324)-Continued
b. DISASSEMBLY
Disassemble wiring harness (see Chapter 6, Section VII).
c. ASSEMBLY
Assemble wiring harness (see Chapter 6, Section VII).
d. INSTALLATION
1 Connect connector (14) to circuit breaker (30).
2 Connect connector (13) to bulkhead disconnect (18).
3 Connect connector (12) to master relay (29).
4 Connect two connectors (10 and 11) to bulkhead to main engine wiring harness and starter relay wiring harness (28).
5 Connect connector (9) to rigger's left service light (27).
6-204
