REPLACE/REPAIR BULKHEAD REAR SLAVE RECEPTACLE WIRING HARNESS (10894850-4)

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
747

TM 9-2350-256-20 CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS 6-76 REPLACE/REPAIR BULKHEAD TO APU, MASTER RELAY, AND RIGGER'S LIGHTS WIRING HARNESS (SINGLE VOLTAGE) (11671324)-Continued 11 Connect connector (1) to bulkhead disconnect (18) . 12 Install 10 clamps (15) using new lockwasher (17) and screw (16) for each. NOTE Follow-on maintenance: Install air inlet grilles (see paragraph 9-56) 6-77 REPLACE/REPAIR BULKHEAD REAR SLAVE RECEPTACLE WIRING HARNESS (10894850-4) THIS TASK COVERS a. Removal b. Disassembly c. Assembly d. Installation INITIAL SET-UP Tools: Parts-Continued: Tool kit, general mechanic's (Appendix C, item 53) Lockwashers (4) (Appendix G, item 108) Lockwashers (1) (Appendix G, item 151) Parts: Lockwashers (4) (Appendix G, item 105) Equipment Condition: Engine deck removed (see paragraph 9-51) WARNING Be certain MASTER switch is OFF when working on electrical systems to avoid electrical shock and burns. Connector No. Electrical Lead To: Wire No. 1 Slave receptacle 50 2 Ground 50 6-206

Privacy Statement
Press Release
Contact