CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-84 REPLACE/REPAIR BILGE PUMP MAIN POWER WIRING HARNESS
(1 0945008)--Continued ..
2 Disconnect connector (2) from vent blower switch (17).
3 Disconnect connector (3) from circuit breaker no. 1 (18).
4 Disconnect connector (4) from circuit breaker no. 2 (19).
5 Disconnect two connectors (5 and 6) from winch light switch (20).
6 Disconnect connector (7) from circuit breaker no. 2 (19).
7 Disconnect connector (8) from circuit breaker no. 3 (21).
8 Disconnect connector (9) from bilge pump indicator light (22).
9 Disconnect connector (10) from bilge pump switch (23).
10 Disconnect two connectors (11 and 12) from generator cutout switch (24).
b. DISASSEMBLY
Disassemble wiring harness (see Chapter 6, Section VII).
c. ASSEMBLY
Assemble wiring harness (see Chapter 6, Section VII).
d. INSTALLATION
1 Connect two connectors (11 and 12) to generator cutout switch (24).
2 Connect connector (10) to bilge pump switch (23).
6-228
