TM 9-2350-256-20
CHAPTER 7:
MAINTENANCE OF TRANSMISSION AND OUTPUT REDUCTlON DRIVES
7-6
REPLACE TRANSMISSION BREATHER ASSEMBLY AND LINE-Continued
a. REMOVAL
1
Disconnect breather line (1) from two elbows (2).
2
Remove two elbows (2).
3
Remove two bolts (3) and two clamps (4).
4
Disconnect hose assembly (5) from two elbows (6).
5
Remove two bolts (7), two flat washers (8), and breather assembly (9).
6
Remove two elbows (6).
b. INSTALLATION
1
Install two elbows (6).
2
Install breather assembly (9), two flat washers (8), and two bolts (7)
3
Install hose assembly (5) to two elbows (6).
4
Install two clamps (4) and two bolts (3).
5
Install two elbows (2).
6
Install breather line (1) to two elbows (2).
NOTE
Follow-on maintenance:
Close engine transmission access doors (see paragraph 9-55)
7-8