SECTION I: WHEELS AND TRACKS
TM 9-2350-256-20
NOTE
Bracket and wheel assemblies are removed, disassembled, assembled, and installed in the same
manner.
a. REMOVAL
1 Remove two self locking nuts (1), two bolts (2), two
center guides (3), and two caps (4).
2 Position track so that track link from which track
shoe guides were removed is directly on support
roller to be removed. Place heavy board on top of
roadwheels. Position jack on board and raise track
clear of support roller.
WARNING
Bracket assembly is heavy, get assistance
when removing assembly to avoid injury.
3 Remove four screws (5), four lockwashers (6), and
bracket and wheel assembly (7).
b. DISASSEMBLY
1 Remove six screws (8), six lockwashers (9), access
cover (10), and gasket (11).
2 Remove lubrication fitting (12) and static grounding
spring (13).
8-15
