SECTION I: WHEELS AND TRACKS
TM 9-2350-256-20
8-5 REPLACE ROADWHEEL SUPPORT HOUSING
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C,
Lockwashers (11) (Appendix G, item 146)
item 53)
Seal, oil (Appendix G, item 259)
Handle (Appendix C, item 18)
Sealer coating (Appendix D, item 25)
Multiplier, torque (Appendix C, item 27)
Replacer (Appendix C, item 39)
Personnel Required:
Socket set (Appendix C, item 48)
Two
Wrench, torque, 0-600 lb-ft (0-813 N m)
Equipment Condition
(Appendix C, item 63)
Roadwheel arm assembly removed (see paragraph
8-3)
NOTE
All roadwheel support housings are removed and installed in the same manner.
a. REMOVAL
WARNING
Roadwheel support housing is heavy, use care when removing housing to avoid injury.
NOTE
It is not necessary to remove roadwheel support housing (1) from hull to remove oil seal (2).
1 Remove roadwheel support housing (1) from hull by removing 11 screws (3) and 11 lockwashers (4).
2 Remove oil seal (2) out of roadwheel support housing (1) and discard.
8-13
