INSTALLATION - TM-9-2350-256-20

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
840

TM 9-2350-256-20 CHAPTER 8: MAINTENANCE OF SUSPENSION SYSTEM b. INSTALLATION 1 Install new oil seal (2) in roadwheel support housing (1) using replacer and handle. WARNING Sealer coating is toxic and gives off harmful vapors. Use in a well-ventilated area. If adhesive gets in eyes try to keep eyes open; flush eyes with water for 15 minutes and get immediate medical attention. Roadwheel support housing is heavy, use care when installing housing to avoid injury. 2 Apply sealer coating to mounting surface of roadwheel support housing (1) and vehicle hull. Install roadwheel support housing on hull with 11 screws (3) and 11 new lockwashers (4). Torque screws to 245-270 lb-ft (332-366 N m). NOTE Follow-on maintenance: Install roadwheel arm assembly (see paragraph 8- 3) 8-6 REPLACE/REPAIR/SERVICE TRACK SUPPORT ROLLER, BRACKET, AND WHEEL THIS TASK COVERS a. Removal b. Disassembly c. Cleaning d. Inspection e. Assembly f. Installation INITIAL SET-UP Tools: Materials/Parts: Tool kit, general mechanic's (Appendix C, Grease, (Appendix D, item 13) item 53) Solvent, dry-cleaning (Appendix D, item 9) Handle (Appendix C, item 18) Gaskets (5) (Appendix G, item 29) Multiplier, torque (Appendix C, item 27) Lockwashers (30) (Appendix G, item 132) Remover and replacer (Appendix C, item 38) Lockwashers (20) (Appendix G, item 147) Replacer (Appendix C, item 40) Seals, oil (5) (Appendix G, item 243) Socket set (Appendix C, item 48) Washers, tab (5) (Appendix G, item 280) Wrench, socket (Appendix C, item 57) Wood (Appendix D, item 35) Wrench, torque, 0-175 lb-ft (0-237 N m) (Appendix C, item 61) Reference Wrench, torque, 0-600 lb-ft (0-813 N m) TM 9-2350-256-10 (Appendix C, item 63) Personnel Required: Two 8-14

Privacy Statement
Press Release
Contact