SECTION I: CAB SUBFLOOR PLATES AND SUPPORTSTM 9-2350-256-20b. INSTALLATION1Install support (14) with two flat washers (17), two new lockwashers (16), and two screws (15).2Install support (10) with two nuts (13), two new lockwashers (12), and two screws (11).3Install support (4) with four nuts (7), four new lockwashers (6), four screws (5), three new lockwashers (9),and three screws (8).4Install support (1) with new lockwasher (3) and screw (2).NOTEFollow-on maintenance:Install fire extinguisher line loop clamps (see paragraph 10-7)Install hydraulic valve forward intermediate right floor plate (seeparagraph 9-23)Install stowage basket forward intermediate left floor plate (seeparagraph 9-21)Install hydraulic valve forward right floor plate (see paragraph 9-3)Install bilge pump (see paragraph 6-102)9-25 REPLACE CENTER AND REAR SUBFLOOR SUPPORTTHIS TASK COVERSa. Removalb. InstallationINTITAL SET-UPTools:Equipment Conditions-Continued:Tool kit, general mechanic's (Appendix C, item 53)Hydraulic valve forward right floor plateremoved (see paragraph 9-3)Parts:U-35 winch center right floor plate removed (seeLockwashers (10) (Appendix G, item 132)paragraph 9-4)Lockwashers (2) (Appendix G, item 118)Rear intermediate right floor plate removed (seeparagraph 9-8)Hydraulic line intermediate rear right centerfloor plate removed (see paragraph 9-11)Rear center floor plate removed (see paragraph9-12)*Rear left-side intermediate floor plate removed(see paragraph 9-13)Intermediate rear left-center floor plate removed(see paragraph 9-17)Intermediate rear left access floor plate removed(see paragraph 9-20)Stowage basket forward intermediate left floorplate removed (see paragraph 9-21)Hydraulic valve forward intermediate right floorplate (see paragraph 9-23)9-29
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
