CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-25 REPLACE CENTER AND REAR SUBFLOOR SUPPORT--Continued
a. REMOVAL
1
Remove two screws (1), two flat washers (2), two lockwashers (3), two screws (4), two lockwashers (5), and
two nuts (6).
3
Remove center support (7) by removing two screws (8), two lockwashers (9), and two nuts (10) from each side
of support.
4
Remove rear support (11) by removing two screws (12), two lockwashers (13), and two nuts (14) from each
side of support.
b. INSTALLATION
1
Install rear support (11) with two screws (12), two new lockwashers (13), and two nuts (14) to each side of
support.
2
Install center support (7) with two screws (8), two new lockwashers (9), and two nuts (10) to each side of
support.
3
Install two screws (1), two flat washers (2), two new lockwashers (3), two screws (4), two new lockwashers
(5), and two nuts (6).
9-30
