CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-22 REPLACE/REPAIR FLOOR AND LIGHT MOUNT PLATE
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C, item 53)
Lockwasher (Appendix G, item 132)
Lockwashers (2) (Appendix G, item 118)
a. REMOVAL
1
Disconnect wire 451 (1).
2
Remove two screws (2), two lockwashers (3), and mount plate (4).
b.
DISASSEMBLY
Remove winch compartment light (5) from mount plate (4) by removing nut (6), lockwasher (7), and spacer (8).
c. ASSEMBLY
Install winch compartment light (5) to mount plate (4) using spacer (8), new lockwasher (7) and nut (6).
d. INSTALLATION
1
Install mount plate (4) with two new lockwashers (3) and two screws (2).
2
Connect wire 451 (1)
9-26
