CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-61 REPLACE LEFT AND RIGHT EXHAUST DOORS
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts-Continued:
Tool kit, general mechanic's (Appendix C, item 53)
Pins, spring (2) (Appendix G, item 230)
Parts:
Personnel Required:
Lockwashers (2) (Appendix G, item 138)
Two
Pins, cotter (4) (Appendix G, item 216)
NOTE
Removal and installation procedures are the same for both left and right exhaust
doors.
a. REMOVAL
1
Remove nut (1), lockwasher (2), and flat washer (3).
2
Remove spring pin (4) to remove eyebolt (5) from base assembly (6).
3
Remove exhaust door (7) by removing two cotter pins (8), two flat washers (9), and two straight pins (10).
b. INSTALLATION
1
Install exhaust door (7) with two straight pins (10), two flat washers (9), and two new cotter pins (8).
2
Install eyebolt (5) to exhaust door (7) and base assembly (6) with new spring pin (4), flat washer (3), new lockwasher
(2), and nut (1).
9-106
