SECTION IV: SEAT ASSEMBLIES
TM 9-2350-256-20
SECTION IV: SEAT ASSEMBLIES
Para.
Task
Page
9-64
Replace/Repair Personnel Seat Assemblies .......................................................9-109
9-65
Replace/Service Commander's Seat Assembly ...................................................9-110
9-66
Replace/Service Rigger's Seat Assembly ...........................................................9-118
9-67
Replace/Service Mechanic's and Driver's Seat Assemblies ................................9-125
9-64 REPLACE/REPAIR PERSONNEL SEAT ASSEMBLIES
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C, item 53)
Lockwashers (4) (Appendix G, item 130)
NOTE
The following procedures are the same for both personnel seat assemblies.
a. REMOVAL
Remove personnel seat assembly (1) from cab
subfloor plate (2) by lifting.
b. DISASSEMBLY
1
Pull pedestal assembly (3) from seat (4).
2 Remove seat (4) from seat cushion (5) by
removing two screws (6) and two lockwashers (7).
c. ASSEMBLY
1
Install seat (4) on seat cushion (5) with two new
lockwashers (7) and two screws (6).
2
Place pedestal assembly (3) onto seat (4).
d. INSTALLATION
Insert personnel seat assembly (1) into cab subfloor
plate (2).
9-109
