REPLACE/SERVICE COMMANDER'S SEAT ASSEMBLY (cont)

REPLACE/SERVICE COMMANDER'S SEAT ASSEMBLY - TM-9-2350-256-20_990

REPLACE/SERVICE COMMANDER'S SEAT ASSEMBLY (cont) - TM-9-2350-256-20_992

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
978

CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS TM 9-2350-256-20 9-65 REPLACE/SERVICE COMMANDER'S SEAT ASSEMBLY-Continued 6 Remove base assembly (22) by removing four nuts (23), four lockwashers (24), and four screws (25). WARNING Ensure that base assembly (22) is raised to full extension and adequately braced prior to spring removal. Failure to do so will result in base assembly collapsing. 7 Pry two adjuster springs (26) from axle (27) to relieve tension. Remove two adjuster springs. 8 Remove two springs (28) and spring retainer (29). 9 Remove bracket (30) by removing four cotter pins (31) and two axles (27 and 32). 10 Remove arm (33) and guard (34) by removing four cotter pins (35) and two axles (36 and 37) from carriage assembly (8) and base (38). 11 Remove release assembly (39) by removing two cotter pins (40) and axle (41) from carriage assembly (8). 12 Remove knob (42) from release assembly (39). 9-112

Privacy Statement
Press Release
Contact