SECTION IV: SEAT ASSEMBLIES
TM 9-2350-256-20
13 Remove pin (43), spring (44), collar (45), and pull
handle (46).
14 Remove subbase assembly (47) from pedestal
assembly (48) by removing four screws (49) and
four lockwashers (50).
15 Remove pad (51) by removing four screws (52)
and four lockwashers (53).
16 Remove spring (54).
17 Remove support (55) by removing two cotter pins
(56), two flat washers (57), and axle (58).
18 Remove handle (59) from frame (60) by removing
two cotter pins (61), two flat washers (62), and
axle (63).
19 Remove knob (64) from handle (59).
9-113
