SECTION IV: SEAT ASSEMBLIES
TM 9-2350-256-20
e. ASSEMBLY
1
Install knob (64) to handle (59).
2
Install handle (59) to frame (60) with axle (63), two flat washers (62), and two new cotter pins (61).
3
Install support (55) with axle (58), two flat washers (57), and two new cotter pins (56).
4
Install spring (54).
5
Install pad (51) with four screws (52) and four new lockwashers (53).
6
Install subbase assembly (47) to pedestal assembly (48) with four screws (49) and four new lockwashers
(50).
7
Install pull handle (46) with spring (44), collar (45), and pin (43).
9-115
