TM 9-2350-256-34-1
c. Test Setup.
(4) Fasten the pyrometer duct to the outlet end
(1) Mount the heater on the test stand in the
of the heater.
same position it will be in when installed for use.
(5) Connect meter V2 to igniter lead on ignition
(2) Turn off all electrical switches.
control (terminal with two wires).
(3) Connect fuel supply to the fuel control valve
(6) Connect remaining electrical equipment as
of heater.
shown in test schematic, figure 3-10.15.
Change 2
3-18.31
