TM 9-2350-256-34-1Figure 2-25. Boom stayline actuating cylinders–removal and installation (Sheet 2 of 2).(2) Installation.Install boom stayline ac-(b) Remove boom actuating cylinder pistol:tuating cylinders in reverse order of removal.eye pins as shown in figure 2-21, and removes bootsb. Boom Actuating Cylinders.from cylinders.(1) Removal.(c) Introduce hoist rope or chain through(a) Procedure for removal and installation ofmechanic’s or driver’s hatch and support weight ofthe boom actuating cylinders is the same as for thecylinder while removing cylinder pin.stayline actuating cylinders except for their location(d) Remove cylinder pins in same manner ason the vehicle. Prior to removal of the boom ac-piston eye pins (refer to figure 2-21) and disconnecttuating cylinders, remove driver’s and mechanic’shydraulic lines. Refer to figure 2-26 for access toseats for working clearance (TM 9-2350-256-20).right side.NOTE(e) While guiding by hand, hoist cylinder outHoist cylinders through driver’s anddriver’s or mechanic’s hatch.mechanic’s hatches.2-54
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business