TM 9-2350-256-34-1
2-27. Main Winch Level Winder Arm Assembly
Remove and install the level winder arm assembly
as shown in figure 2-24.
2-28. Spade Lock Control
The spade lock control components are accessible
without removing the main winch and spade. Refer
to TM 9-2350-256-20 for removal, repair and in-
stallation instructions.
2-29. Boom and Stayline Actuating Cylinder As-
semblies
and Stayline Actuating
Cylinder Crank Arms
a. Boom Stayline Actuating Cylinders.
(1) Removal. Prior to removing the boom
stayline actuating cylinders, raise boom (TM
9-2350-256-10) so that cylinder pistons are re-
t r a c t e d a n d r e m o ve
e n g i n e d e c k ( TM
9-2350-256-20). Remove access plates 9, 17 (fig.
2-2). Remove boom stayline actuating cylinders as
shown in figure 2-25.
Figure 2-24. Main winch cable and
level winder arm assembly—removal and installation.
2-52
Change 2
