TM 9-2350-256-34-1
b. Installation. Install the main winch and spade
assembly in reverse order of removal, coating
mating surfaces with sealant tape, 10894309. In-
stall the winch cable (para 2-22).
2-26. Main Winch Motor
NOTE
Use Hydraulic Motor Kit, 11672160 on
retrofitted vehicles when replacing a
motor which is not a Dennison Model No.
M4E-185-3N00-B101-M40712. Remove
subfloor plates 3, 4, 24 (fig. 2-3). Remove
and install the main winch motor as
shown in figure 2-23.
2-50
Change 2