TM 9-2350-256-34
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
OIL PRESSURE REGULATOR VALVE REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool kit, general mechanic's (item 34, WP 0086 00)
Spring (item 40, WP 0087 00)
Washers (2) (item 22, WP 0087 00)
Materials/Parts
Equipment Condition
Gasket (item 231, WP 0087 00)
Nuts, self-locking (2) (item 109, WP 0087 00)
Grille doors removed (TM 9-2350-256-20)
WARNING
Oil pressure regulator valve cover (1) is spring loaded. Exercise care when removing it.
Removal
1.
Remove oil pressure regulator valve cover (1) by removing two self-locking nuts (2) and washers (3). Discard self-locking
nuts.
2.
Remove gasket (4), washer (5), plate (6), spring (7), plunger (8), and oil pressure sleeve (9). Discard gasket.
Installation
1.
Install oil pressure sleeve (9), plunger (8), spring (7), plate (6), washer (5), and gasket (4).
2.
Install oil pressure regulator valve cover (1) with two self-locking nuts (2) and washers (3).
END OF WORK PACKAGE
0025 00-1/2 blank
