TM 9-2350-256-34
0039 00
Cleaning
WARNING
Solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and use in a well-ventilated area. If solvent gets on skin or
clothing, wash immediately with soap and water.
1.
Clean all metal parts with cleaning compound or paint thinner. Use a wire brush where necessary and dry with compressed
air.
Inspection-Acceptance and Rejection Criteria
1.
Check rod and bearings for cracks or distortion.
2.
Check threaded parts for cross-threading, nicks, or excessive wear.
Repair or Replacement
1.
Replace all defective parts. If rod or either bearing is defective, replace entire assembly.
0039 00-2