TM 9-2350-256-34
0038 00
2.
Disconnect 11 connectors (1).
3.
Remove four nuts (2), screws (3), lockwashers (4), and wiring harness (5) from accessories panel (6). Discard lockwashers.
4.
Remove lead (7).
Repair or Replacement
1.
Repair wiring harness and lead as required in accordance with WP 0033 00.
Installation
1.
The rear view of the accessories panel is provided below. Be careful to match circuit numbers to the correct receptacles:
NOTE
The unidentified plugged leads are not used.
2.
Install lead (7).
3.
Connect wiring harness (5) to accessories panel (6) by installing four lockwashers (4), screws (3), and nuts (2).
4.
Install 11 connectors (1).
END OF WORK PACKAGE
0038 00-2
