TM 9-2350-256-34
0041 00
1.
Remove 12 screws (1), lockwashers (2), head assembly (3), gasket (4), and oil filter cartridge (5) from transmission
subassembly (torque converter) (6). Discard lockwashers and gasket.
2.
Remove snap ring (7), valve seat (8), relief valve (9), inner compression ring (10), and outer compression ring (11) from
head assembly (3). Discard snap ring.
Assembly
NOTE
Both transmission oil filters are assembled the same way. This procedure covers one transmission oil
filter.
1.
Install outer compression ring (11), inner compression ring (10), relief valve (9), valve seat (8), and snap ring (7) to head
assembly (3).
2.
Install oil filter cartridge (5), gasket (4), head assembly (3), 12 lockwashers (2), and screws (1) to transmission subassembly
(torque converter) (6).
Installation
1.
Install transmission oil filter in accordance with TM 9-2350-256-20.
END OF WORK PACKAGE
0041 00-2
