TM 9-2350-256-34
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
VISION CUPOLA PADDING ASSEMBLY MAINTENANCE
REMOVAL, DISASSEMBLY, CLEANING, INSPECTION, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Materials/Parts
References
TM 9-2350-256-20
Removal
1.
Remove vision cupola in accordance with TM 9-2350-256-20.
Disassembly
1.
Strip latex coating (1), interply (2), and crash pad (3) from support (4).
Cleaning
WARNING
Solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and use in a well-ventilated area. If solvent gets on skin or
clothing, wash immediately with soap and water.
1.
Scrape dirt and adhesive from support and clean with a wire brush. Clean with cleaning compound or paint thinner and dry.
Inspection-Acceptance and Rejection Criteria
1.
Inspect support for cracks, distortion, breakage, or other damage that would impair its use. If defective, replace entire
padding assembly.
0044 00-1