TM 9-2350-256-34
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
ROCKET AMMUNITION STORAGE BOX PADS MAINTENANCE
REMOVAL, CLEANING, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts
Removal
1.
Remove pads (1) from rocket ammunition storage box (2) and discard.
Cleaning
1.
Clean area thoroughly by scraping off old adhesive and then removing dirt, grease, and other foreign matter with a wire
brush.
Installation
1.
Cut new pads (1) to proper size from sheets.
2.
Apply fresh adhesive and wait until adhesive becomes slightly tacky.
3.
Press new pads (1) firmly into place to rocket ammunition storage box (2) and clean any excess adhesive from surface of
pads.
4.
Allow adhesive to thoroughly dry before closing rocket ammunition storage box (2).
END OF WORK PACKAGE
0045 00-1/2 blank